Cellular Least Cost Routing


 
Reduced PTT charges for cellular calls 
Cellular least cost routing
Quick and easy installation 
State-of-the-art technology-high audio quality
Compatible with GSM, AMPS, NAMPS, TDMA, CDMA, and ETACS networks
Quick return on investment
Compatible with all major brands of PBX
Up to 3 cellular lines
Analog line interface

 


 
 

Calls from the office to the cellular subscribers are charged twice - Once by the PTT and second, by the cellular provider.
 

 

 

Cellulink 301 direct connection to the cellular provider bypasses the PTT when calling to cellular subscribers, thus saving the interconnectivity charges and preventing the double-charge.
 

 

 

Utilizing the PBX least Cost Routing system, the CelluLink 301 enables to route outgoing calls from the office cellular subscribers via any chosen provider, thus maintaining the lowest communication costs.

Incoming calls from the cellular subscribers to the office are also charged significantly less when the calls are made through the CelluLink 301. Here again, only the cellular costs are charged, while bypassing the PTT.
 

 

 

The fact that the unit provides three cellular lines brings to an un-matched cost-per-line offering. Return on investment of a CelluLink 301 is estimated by only several months of operation.
 

 

 

The CelluLink 301 is the ideal solution for the offices that maintain a considerable volume of communication wih cellular subscribers.

In countries where Virtual Private Networks (VPN) are applied, the CelluLink 301 offers even more considerable savings. The VPN enables very low tariffs for cellular-to-cellular calls between employees of a given company. These tariffs are significantly lower then regular cellular-to-cellular calling tariffs.
 

  Technical specifications
Main voltage  230 V/50 Hz
Supply voltage (secondary) 9V-12VDC
Load current 2 A max
Dial tone  400 Hz ± 20%
Connector type RJ-11C or RJ-12 4/6
Two-wire circuit Tip/Ring
Voltage 50 VDC nom
Current 30 mA max
Ringer signal 25 Hz, 65 Vp-p
Telephone dialing format  DTMF
Dimensions (LxWxH) 240x120x240 mm
Environmental Conditions:
-Operating temperature 0°C TO 60°C
-Humidity 5% to 95%
Cellular Phone Interface
Phone models* Nokia and Ericsson 
Network support GSM,TDMA,CDMA,AMPS,NAMPS,ETACS
External antenna (optional) FME or mini-UHF connectors

*Other models may be available

Specification subject to changes without notice. 


 
 
 
 
 
 
 
Live chat by AliveChat