Telecom FM: Specialty Line of CE & UK Approved Products

GSM Wall Terminals, Desktop Phones, VoIP Router

This is shipped in smaller quantity direct to you from London or Johannesburg, and in volume quantity, ships direct from China. Retail $299.00 USD On Sale $249.00 USD plus $50.00 EMS Airmail. This unit is not CE or FCC approved. Not for use in Europe or the USA. GSM 900/1800mhz Frequency.

 "CELL ROUTE AC"  Single SIM "Fixed Wireless Terminal" (900/1800mhz) Connect with your phones in the home or office...GSM Sterling 199.00

CellRoute has been developed to enable major network operators to provide Fixed Wireless Access to emerging markets around the world.

In countries where having a fixed line is either an expensive option or network infrastructure does not exist, the CellRoute can provide fixed line functionality over the GSM network.

CellRoute provides users with high quality voice using EFR (Enhanced Full Rate) codecs and has a data link rate of 9600 Baud for Email and Internet access.

The CellRoute can be self-installed by the end user, making the provisioning cycle simple and reducing costs for the network operator

Technical Specification
Telephony Interface Call Control DTMF Loop Current 40mA off hook Line impedance 600-ohm complex Ring Voltage 70Vrms Ring Load REN 4 CLIP Bellcore FSK Line Voltage 48V on hook GSM Interface Bands E-GSM 900MHz GSM 1800MHz GSM Phase 2+ Transmit Power Class 4 (2W) for E-GSM 900MHz Class 1 (1W) for GSM 1800MHz Speech Codecs Half Rate (ETS 06.20) Full Rate (ETS 06.10) Data Rate 2400, 4800, 9600 Baud SIM Card 3V Antenna Integral Omni directional Antenna with SMA connector for external antenna option Physical Interfaces Telephone Analogue / RJ11 or BT603 option Data Port RS232 / RJ45 with DB-9 converter GSM Antenna Gold plated SMA male SIM Card 3V Small card retained under rear panel Indication 2 x LED indication for power / Transmission Status Approvals CE Certification to R & TTE directive 1999/5/EC GSM Certifications: ETS 300 607-1 Digital Cellular Telecommunications system EN 301 419-1 Global System for Mobile communication ETS 300 342-1 Radio Equipment and Systems Power Supplies Primary 110-240Vac @ 47-63Hz GSM Antenna Gold plated SMA male		Features Overview High Ringer Equivalence POTS Interface supports up to 4 additional extensions Highly compatible POTS & PABX interface Bellcore Caller Line ID Presentation GSM Network features supported (subject to network support) Selectable Dial tone and Ring cadences RS232 Data port for emails/web and PC faxes SIM lock Network lock Remote Software Upgrade Off-hook howler External Antenna facility Physical Specification Height 150 mm Width 122 mm Depth 42 mm Weight 460gm

• "CELL ROUTE GPRS"  Single SIM "Fixed Wireless Terminal" (900/1800mhz) GSM for Hi-Speed Data Connect to your PC (85kbps+) PS 199.00

  Technical Specification
  Telephony Interface Call Control DTMF Loop Current 40mA off hook (20mA on mains fail) Line impedance 600-ohm complex Ring Voltage 70Vrms Ring Load REN 4 CLIP Bellcore FSK Line Voltage 48V on hook (36V on mains fail) GSM Interface Bands GSM 850MHz E-GSM 900MHz GSM 1800MHz GSM 1900MHz GSM Phase 2+ Transmit Power Class 4 (2W) for E-GSM 900MHz Class 1 (1W) for GSM 1800MHz Speech Codecs Half Rate (ETS 06.20) Full Rate (ETS 06.10) Data Rate Up to 85.6 kbps via GPRS SIM Card 3V Antenna Integral Omni directional Antenna with SMA connector for external antenna option Physical Interfaces Telephone Analogue / RJ11 or BT603 option Data Port RS232 / RJ45 with DB-9 converter GSM Antenna Gold plated SMA male SIM Card 3V Small card retained under rear panel Indication 2 x LED indication for battery / Transmission Status Approvals CE Certification to R & TTE directive 1999/5/EC GSM Certifications: ETS 300 607-1 Digital Cellular Telecommunications system EN 301 419-1 Global System for Mobile communication ETS 300 342-1 Radio Equipment and Systems Power Supplies Primary 110-240Vac @ 47-63Hz Secondary 2 x A size NiMH rechargeable batteries with auto switch over on mains failure GSM Antenna Gold plated SMA male		Features Overview High Ringer Equivalence POTS Interface supports up to 4 additional extensions Highly compatible POTS & PABX interface Integral Battery Back-up Bellcore Caller Line ID Presentation GSM Network features supported (subject to network support) Selectable Dial tone and Ring cadences RS232 Data port for emails/web and PC faxes SIM lock Network lock Remote Software Upgrade Off-hook howler External Antenna facility Physical Specification Height 150 mm Width 122 mm Depth 42 mm Weight 460gm

   

  ---

• "GSM ROUTE ANALOGUE" 2-SIM "Fixed Wireless Terminal" (900/1800mhz) PBX Interface with Intelligent "Least Cost Routing" (LCR) PS399.00

   

  GSM-Route has been developed to enable major mobile carriers and resellers to convert outgoing and incoming calls from fixed line to mobile, thus enabling end customers to take advantage of cost savings. The GSM-Route will operate intelligently - routing calls to the most cost effective networks without the need for dedicated PBX ports or extra PBX programming. The GSM-Route may be used as a wireless local loop, removing the need for fixed analogue lines.  Technical Specification Main Features Advantages Unrivalled Design The GSM-Route incorporates unique patented intelligent routing. Proven GSM Technology The GSM-Route uses the proven Siemens transceiver modules. Compatibility The GSM-Route has been designed to work in conjunction with all major PBX / Key Systems. Full Remote Management The GSM-Route is fully managed via TelecomFM's Digital Management Centre. The product can therefore be upgraded or reconfigured at the request of the customer. Transparent when not routing The PBX / Key System works as normal when not routing calls. There is NO requirement for dedicated ports on the PBX and NO PBX re-programming is required. Ability to route any type of call The GSM-Route will route all types of calls, - International, National etc. Remote Aerials Remotely positioned aerials ensure clarity and non-interference. Dual SIMs SIM cards can be attributed to different operators. Call Stats Minutes are counted for both routed and non-routed calls. Polling between SIMs Calls are polled alternatively between SIM to allow maximum advantage on minute bundles. GSM Interface Bands E-GSM 900MHz, GSM 1800MHz, GSM Phase 2+ Transmit Power Class 4 (2W) for E-GSM 900MHz Class 1 (1W) for GSM 1800MHz Speech Codecs Half Rate (ETS 06.20) Full Rate (ETS 06.10) EN 301 419-1 Enhanced Full Rate    (ETS 06.50 / 06.60 / 06.80) Antenna External omni-directional antenna with SMA connection Approvals CE Certification to R & TTE directive 1999/5/EC GSM Certifications:    ETS 300 607-1    - Digital Cellular Telecommunications system    EN 301 419-1    - Global System for Mobile communication    ETS 300 342-1    - Radio Equipment and Systems Technical Overview Power 110-240v.  50-60Hz. Operating Temp. 0 - 45ºC Humidity 0 - 85% non-condensing Physical Specification Length 286 mm Breadth 208 mm Height 52 mm Weight (unit) 900g (GSM-Route, as photo.) Weight (total) 2.08kg (with power supply, antennae, packaging etc.)

   

  ---

• "GSM ROUTE ISDN" 2-SIM "Fixed Wireless Terminal" (900/1800mz) PBX Interface with Intelligent "Least Cost Routing" (LCR) PS 449.00

  ---

• "ONE STREAM": Convergence of VoIP, GSM & PSTN. PBX Multi-Input Terminal with Intelligent Outbound Dialing  PS 995.

  ---

  customer service technical supportLive Chat

  Contact Details:

  

  High Technology International Ltd
   
  Email:hightechintl@yahoo.co.uk
  +44 (0)20 7193-9760 Office
   

  ---

  Copyright 1995-2010 All Rights Reserved

  Disclaimer: No rights, expressed or otherwise are claimed herein as to our representative status for, or relationship with, any particular firm mentioned, and is offered for informational purposes only. All Trademarks are the property of the respective companies referred to within..